Lcd Unit - Toshiba Portege R300 Maintenance Manual

4.12 LCD unit

4.12 LCD unit

Removing the LCD cable / Wireless LAN antenna cable / Bluetooth antenna
cable
To remove the LCD cable / Wireless LAN antenna cable / Bluetooth antenna cable, follow
the steps below and refer to Figure 4-17.
1. Disconnect the LCD cable from the connectors CN5601 on the system board.
2. Disconnect the Bluetooth antenna cable (only Bluetooth model).
3. Remove following screw fixed wireless LAN card cover.
• M2×4B
• M2×4B
NOTE: Some models are not equipped with the wireless LAN card cover.
4. Disconnect the wireless LAN cable (white / black) and Bluetooth antenna cable
(only Bluetooth model).
Wireless LAN card cover
(Some models are not equipped)
Wireless LAN antenna cable
Harness holder
Figure 4-17 Removing the LCD cable / Antenna cables
PORTÉGÉ R300 Maintenance Manual (960-591)
S-THIN HEAD screw ×2 (for model without wireless LAN card cover)
Security torx screw
CN5601
4 Replacement Procedures
×1 (for models with wireless LAN card cover)
LCD cable
Bluetooth antenna cable
[CONFIDENTIAL]
Security torx
4-25