Table of Contents
Advertisement
6) When the file copy is completed, the following test menu is displayed. Press r. The
Responder T&D is started.
************************************************************
*
*
Atheros MB6x DUT mode Maintenance T&D Menu
*
*
d : DUT mode
*
*
r : Responder mode
*
************************************************************
SELECT MODE No.(d or r) :
3.26.2 Test procedure
The following procedures show how to start the computer of DUT side.
1) Boot the computer by Atheros T&D boot media.
2) After displaying the following menu, input m and press Enter.
***********************************************************
*
*
Atheros MB4x/MB5x/MB6x Maintenance T&D Menu
*
*
s : Atheros MB4x DUT mode
*
*
Please exchange FD for MB4x DUT media
*
*
h : Atheros MB5x DUT mode
*
*
Please exchange FD for MB5x DUT media
*
*
r : Atheros MB5x Responder mode
*
*
Please exchange FD for MB5x Responder media
*
*
m : Atheros MB6x setup mode
*
***********************************************************
Please input the ( s / h / r / m ) key and push the "Enter" key :
2) The RAM drive name which has been set at booting is displayed and command input
is requested. Input mb6x X and press Enter. The part of X is the RAM drive name.
In the following display, it is "C".
Please input the following command. "mb6x X" > mb6x c [Enter]
3) The following message is displayed. Change the FD with "MB6x setup media 1" and
press Enter. The file copy from the FD to the RAM drive is started.
Please exchange FD for "MB6x setup media 1"
Press any Key to continue . . .
PORTEGE R300 Maintenance Manua l(960-591)
1,440
(1K)
C:
3 Tests and Diagnostics
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Installed Device=RAMDRIVE
[CONFIDENTIAL]
*
*
*
*
*
*
*
3-61
Advertisement
Table of Contents
Troubleshooting
