Kyocera ECOSYS M2030dn/PN Service Manual page 49

Item No.
U065 Adjust Scanner Motor Speed
Description
Adjusts the magnification of the original scanning.
Purpose
Make the adjustment if the magnification in the main scanning direction is incorrect.
Make the adjustment if the magnification in the auxiliary scanning direction is incorrect.
Method
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
Main Scan
Sub Scan
Adjustment: [Main Scan]
1. Change the setting value using the cursor left/rigrt keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
Increasing the setting enlarges the image and decreasing it narrows the image.
2. Press the start key. The value is set.
Description
Description
Scanner magnification in the
main scanning direction
Scanner magnification in the
auxiliary scanning direction
Original
Figure 1-3-4
1-3-19
Setting
range
-32 to 127
-25 to 25
Copy
Copy
example 2
example 1
2PK/2PL/2PM/2PN-5
Initial Change in
setting value per step
0 0.1 %
0 0.1 %