Kyocera ECOSYS M2030dn/PN Service Manual page 127

Code
4301 Duplex sensor non arrival
jam
4302
4303
4309
4311 Duplex sensor stay jam
4312
4313
4319
9000 No paper feed from DP
9001 DP original conveying jam
9003 DP original switchback jam
9004
9011 DP top cover open
9410 DP timing sensor stay jam
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-2).
Contents
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
1.
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
2.
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
3.
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from the MP
tray.
The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
1.
The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
2.
The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
3.
The duplex sensor (DUS) does not turn off after a
switchback start, during paper feed from the MP
tray.
DP timing sensor (DPTS) does not turn on during
original feed from DP (Retry 5 times).
DP timing sensor (DPTS) turns off within the speci-
fied time since the sensor turns on.
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn off within specified
time.
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn on within specified
time since original switchback operation starts.
The DP top cover is opened during original feed-
ing.
The DP timing sensor (DPTS) does not turned off
within the specified time its turning on.
Conditions
1-4-5
2PK/2PL/2PM/2PN
Jam
location*
G
G
G
G
F
F
F
F
H
H
H
H
H
H