Kyocera ECOSYS M2030dn/PN Service Manual page 48

Item No.
U034 Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034
Adjustment: [LSU Out Left]
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
Display
Left
MPT
Cassette1
Cassette2
Cassette3
Duplex
5. Change the setting value using the cursor left/rigrt keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U066
(P.1-3-21) (P.1-3-25)
Description
Standard value
Paper feed from MP tray
Paper feed from optional cassette1 -70 to 70
Paper feed from optional cassette2 -70 to 70
Paper feed from optional cassette3 -70 to 70
Duplex mode (second)
Center line of printing
(within ± 2.0 mm)
Correct image
U067
(P.1-3-22) (P.1-3-27)
1-3-18
Description
U071
Setting
range
0 to 1180
-70 to 70
-70 to 70
Output
example 1
Figure 1-3-3
U072
2PK/2PL/2PM/2PN-5
Initial Change in
setting value per step
600 1 dot
0 1 dot
0 1 dot
0 1 dot
0 1 dot
0 1 dot
Output
example 2