Kyocera ECOSYS M2030dn/PN Service Manual page 121

Service items
FAX call Setting FAX call setting
Description
Selects if a fax is to be connected to either a PBX or public switched telephone network.
Selects the mode to connect an outside call when connected to a PBX.
Access code registration for connection to PSTN.
Purpose
To be executed as required.
Method
1. Enter the Service Setting menu.
2. Select [FAX Call Set.] using the cursor up/down keys.
3. Press the start key.
Setting the connection to PBX/PSTN
1. Select [Exchange Select.] using the cursor up/down keys.
2. Press the start key.
3. Select [PBX] or [PSTN] using the cursor up/down keys.
4. Press the start key. The setting is set.
Setting for PBX
1. Select [PBX Setting] using the cursor up/down keys.
2. Press the start key.
3. Select [Loop], [Flash] or [Earth] using the cursor up/down keys.
4. Press the start key. The setting is set.
Setting access code to PSTN
1. Select [Dial No. to PSTN] using the cursor up/down keys.
2. Press the start key.
3. Enter access code using the numeric keys. (0 to 9, 00 to 99)
4. Press the start key. The setting is set.
Completion
Press the stop key.
Display
Exchange Select.
PBX Setting
Dial No. to PSTN
Description
Description
Setting the connection to PBX/PSTN
Setting for a PBX
Setting access code to PSTN
1-3-91
2PK/2PL/2PM/2PN