Cleaning The Lens - Sony Cybershot DSC-RX10 Help Manual

Help Guide
How to Use
Digital Still Camera
DSC-RX10
On cleaning
Cleaning the lens and flash
Wipe the lens and flash with a soft cloth to remove fingerprints, dust, etc.

Cleaning the lens

Do not use a cleaning solution containing organic solvents, such as thinner, or benzine.
When cleaning the lens surface, remove dust with a commercially available blower. In case of dust
that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens
cleaning solution. Wipe in a spiral pattern from the center to the outside. Do not spray lens
cleaning solution directly onto the lens surface.
Cleaning the flash
Clean the flash surface before use. The heat of the flash emission may cause dirt on the flash surface
to start smoking or burning. Wipe the flash surface with a soft cloth to remove dirt or dust, etc.
Cleaning the product surface
Clean the product surface with a soft cloth slightly moistened with water, then wipe the surface with a
dry cloth. To prevent damage to the finish or casing:
Do not expose the product to chemical products such as thinner, benzine, alcohol, disposable cloths,
insect repellent, sunscreen or insecticide.
Do not touch the product with any of the above on your hand.
Do not leave the product in contact with rubber or vinyl for a long time.
Cleaning the monitor
If oil from your hand or hand cream, etc., remain on the monitor, the original coating may become
easily removable. Wipe oil or hand cream off as soon as possible.
If you wipe the monitor firmly using tissue paper, etc., the coating may be scratched.
If the monitor becomes dirty with fingerprints or dust, gently remove the dust from the surface, and
then clean the monitor using soft cloth, etc.
Downloaded from www.Manualslib.com manuals search engine
Notes on use
4 -477-079-12(1)
Copyright 2013 Sony Corporation