Adjusting The Image Shape - Epson PowerLite 7850p User Manual

Adjusting the Image Shape

Even if your projected image has no parallel sides, you can correct the
problem with Quick Corner. Follow these steps:
1. Press the button on the remote control (or on the
Menu
projector's control panel).
2. Select the
Setting
3. From the Setting menu, select
4. Select
Quick Corner
You see this screen:
[
[ [
[ESC] :Return (Press 1 second to [ESC]
5. Press the button to select the corner you want to adjust.
Enter
6. Use the pointer button on the remote control (or the arrow
buttons on the projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed to adjust any remaining corners.
8. When done, press the
projector's control panel to exit the menu system.
If remains selected in the Keystone menu, the Quick
Quick Corner
Corner screen appears whenever you press the projector's
buttons. You can then follow steps 5 through 8 above to correct the
shape of your image, or press
menu and press .
Enter
Keystone
and press .
Enter
]:Adjust Adjust
/
] ] :Move next :Move next
:Return (Press 1 second to
reset) reset)
button on the remote control or
ESC
to exit Quick Corner.
ESC
and press .
Enter
Keystone
Using the Remote Control
note
For more information on
using the menu system, see
Chapter 6.
note
If you are not satisfied with
the corrections made, press
the button for one
ESC
second to reset the screen to
its original shape.
37