Using Emp Monitor; Opening And Closing Emp Monitor - Epson PowerLite 7850p User Manual

note
If you want to monitor
projectors while they are in
standby mode, select
in the
Standby Mode
Advanced 1 menu, then
select . See
Network ON
page 134.
Managing Projectors
140

Using EMP Monitor

EMP Monitor lets you use a remote computer to manage your
projectors, whether connected wirelessly or over a wired network. It
lets you easily turn the projectors on or off (together or individually),
switch image sources, and check their status.
Before using EMP Monitor, make sure you've installed the software as
described in Appendix A. The computer you're using to monitor the
projector should already be connected to your network.

Opening and Closing EMP Monitor

To start EMP Monitor, click
EPSON Projector > EMP Monitor
If you've added the program to the Startup programs folder (see
page 147), then it may already be open. If so, click the icon in the
system tray on the lower-right corner of your screen to display the
EMP Monitor window:
To close EMP Monitor, right-click the program icon shown above,
then select .
Exit
or
Start > Programs All Programs >
.
Click here to start EMP Monitor