Connecting An S-Video Source - Epson PowerLite 7850p User Manual

Connecting to Computers, Cameras, and Other Equipment
60

Connecting an S-Video Source

1. Locate an S-video cable (one is usually provided with your video
equipment, or you can purchase one from EPSON; see page 13).
2. Connect the cable between the S-video connector on your player
and the connector on the projector:
S-Video
3. If you want to play sound through the projector, see page 65 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 1
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image. Once the projector is turned
on, select the image source: press the
remote control, or press the
control panel repeatedly until
projected image.
button on the
S-Video
button on the projector's
Video/BNC
is displayed on the
S-Video