Monitoring And Control Using Emp Monitor - Epson EasyMP EMP-735 Operation Manual

Setting, Monitoring and Controlling from a Computer

Monitoring and Control Using EMP Monitor

When the projector and a computer are connected with the wireless LAN access
point mode, it is possible to simultaneously monitor and control multiple projectors
using the EMP Monitor. It is possible for a single operator to simultaneously control
the starting and monitoring of projectors arranged in separate classrooms and
meeting rooms by using the EMP Monitor.
Use the EMP Monitor to monitor and control projectors using the following procedure.
Tip :
• A maximum of 64 projectors can be collectively monitored and controlled.
• Setup and control are possible using the EMP Monitor if "Standby Mode" is "Network
ON" in the "Advanced" menu of the projector's configuration menu, even if the
projector is in standby mode (when the Power indicator is lit orange).
• Before using the EMP Monitor, configure the network settings to establish connections
between the projectors and the computer via a wireless LAN.
Access Point Mode" in the EasyMP Setup Guide.
• The administrative function using EMP Monitor can only be used when connected via
wireless LAN in Access point mode. It cannot be used on a wireless LAN in Easy
connect mode.
1
In Windows, select "Start" - "Programs" (or, "All Programs") -"EMP
Monitor" - "EMP Monitor".
The EMP Monitor starts.
2
Click the "Resister projector" button during initial start-up after installing
the EMP Monitor, or to register additional projectors. Continue with Step
8 if all projectors are registered.
EasyMP Operation Guide
41
See "Connecting in