Sound Adjustment - Toshiba 50L9450 Series Owner's Manual

Selecting the stereo programmes
1
When a stereo programme is received,
d Stereo appears.
4
ABCD
Press s to select the stereo/monaural mode.
2
d Stereo and e Mono appear cyclically on
the screen.
Selecting the bilingual programmes
1
When a bilingual programme is received,
j Dual appears.
2 Press s to select the sound to be heard. The
sound diff ers according to the transmission
system: NICAM or German stereo/bilingual
broadcast.
Display
NICAM
j Dual 1
Sub I sound
J Dual 2 Sub II sound
e Mono
Main sound
NOTE:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the e Mono 2
mode will mitigate the problem.
1
When a monaural programme is received, e
Mono appears.
2 Press s to select a monaural mode that is
easy to hear. e Mono 1 and e Mono 2 appear
cyclically to the screen.
NOTE:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
506584L9450Series_En.indd 29 506584L9450Series_En.indd 29
Using the TV's features
Stereo
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—

Sound adjustment

Adjusting the sound balance
1
From the SOUND menu, press  or  to select
the Balance.
2
Press  or  to adjust the settings as desired.
Using the Sound Mode
Choose your preferred Sound Mode (Auto,
Dynamic, Natural or Clear Voice).
To use the button
1
Press to view the diff erent modes available.
To use the Menu
1
From the SOUND menu, press  or  to select
the Sound Mode.
2
Press  or  to select Auto, Dynamic, Natural
or Clear Voice.
Adjusting the sound quality
You can adjust the basic sound quality.
NOTE:
This can be set when Sound Mode is set to Dynamic,
Natural or Clear Voice.
1
From the Advanced Sound Settings menu,
press  or  to select Equaliser, and then
press OK.
2
Press  or  to select Graphic Equaliser, and
then press OK.
3
Press  or  to select a frequency band, and
press the  or  to adjust the level for that
band.
Using the Power Sound Equaliser
1
From the Equaliser menu, press  or  to
select Power Sound Equaliser, and then press
OK.
2
Press  or  to select On or Off .
Using the Surround
Surround help to create rich and wider sound from
stereo sound sources.
1
From the Advanced Sound Settings menu,
press  or  to select Surround.
2
Press  or  to select On or Off .
29
2014/08/21 14:23:47 2014/08/21 14:23:47