Toshiba 50L9450 Series Owner's Manual page 15

5
Press ,,  or  to select the Primary
Subtitle Language, Secondary Subtitle
Language, Primary Audio Language or
Secondary audio Language.
Quick Setup
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
6
Press OK, to display the Location menu.
Press  or  to select Store or Home.
You can select either Home or Store mode.
Home is recommended for normal home use.
Select Store when using a TV for displaying in
a shop, etc.
Location
To use the TV for displaying in a store showroom,
please select [Store]. [Home] mode is recommended
for normal use.
Store
Store mode:
• A confi rmation menu will appear.
• Intelligent AutoView menu is not available.
7
Press OK to display the Intelligent AutoView
menu (- page 24).
Press  or  to select Yes or No.
Intelligent AutoView
Intelligent AutoView mode automatically adjusts picture settings
to suit ambient light conditions. Do you wish to enable Intelligent
AutoView mode?
Yes
• When you select No, skip to step 9.
8
Press OK to display the Lighting Type menu.
Press  or  to select Fluorescent Light or
Light Bulb.
• Set the ambient light environment to help
Intelligent Auto View function more
eff ectively (- page 24).
Lighting Type
To use the TV under the bluish lighting environment, please select
[Fluorescent Light]. To use the TV under the orangish lighting
environment, please select [Light Bulb].
Fluorescent Light
506584L9450Series_En.indd 15 506584L9450Series_En.indd 15
Introduction / Getting started
9
Thai
Thai
Thai
Thai
10
Home
11
12
No
NOTE:
The Quick Setup menu can also be displayed from
the SETUP menu at any time while watching TV
Light Bulb
broadcasts.
Press OK to display the Auto Tuning setup
menu.
Auto Tuning
Tuning Mode DTV and ATV
Scan Type Quick Scan
Auto Signal Booster
Start Scan
Select Start Scan and press OK to start the
automatic search.
The television will start to search for available
DTV and/or ATV channels. The progress bar will
indicate the scan status.
You must allow the television to complete
the search.
Auto Tuning
Progress
DTV Tune 1%
Waiting...
ATV Tune
Frequency : 218.000 MHz
When the search is complete, the search result
is displayed.
The Auto Tuning screen will display the total
number of services found.
Press  or to view the DTV (digital channel)
or ATV (analogue channel) lists.
Press or  to move through the list to select
a channel and press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the
signal may be weak, so the station order can be
changed using ATV Manual Tuning.
Remember:
Press TV at any time to select between ATV and
DTV modes.
NOTE:
The time will be set automatically by transmission
but can be advanced or decreased by using Local
Time Setting in the DTV Settings screen.
On
Found
0
15
2014/08/21 14:23:44 2014/08/21 14:23:44