Using the 1080p Pure Direct Mode
When Intelligent Scene Optimiser is set to Game
or PC, this setting can be changed to prioritise
picture quality.
• When Intelligent Scene Optimiser is set to
Game or PC, response speed is prioritised by
default.
If the setting is changed to prioritise picture
quality, response speed may decrease slightly.
1
From the Advanced Picture Settings menu,
press or to select 1080p Pure Direct
Mode.
2
Press or to select Auto, On or Off .
Auto : The TV chooses the ideal setting based
on the Intelligent Scene Optimiser setting.
On : Prioritises picture quality.
Off : Prioritises response speed. The picture
quality will be reduced slightly.
Using the 4K AMR
This function performs speed processing according
to the Intelligent Scene Optimiser setting.
1
From the Advanced Picture Settings menu,
press or to select 4K AMR.
2
Press or to select High, Middle, Standard,
or Off .
• When Intelligent Scene Optimiser is set to
Game, you can select either Game Smooth or
Game Direct.
Game Smooth :
Movement in the game picture is smoothed
out.
Game Direct :
The game picture is displayed as it is.
• When Intelligent Scene Optimiser is set to
PC/Photo, you can choose either Monitor
Smooth or Monitor Direct.
Monitor Smooth :
The picture from the source device is
smoothed out.
Monitor Direct :
The picture from the source device is shown
as it is.
506584L9450Series_En.indd 27
506584L9450Series_En.indd 27
Using the TV's features
Resetting the Picture Settings
This feature resets the Picture Settings to the
factory settings.
NOTE:
If no picture settings have been changed, Reset is not
available.
1
From the Picture Settings menu, press or
to select Reset, and then press OK.
2
A confi rmation message will appear. Press or
to select Yes, and then press OK.
Using the Lighting Type
Set the ambient light environment to help
Intelligent Auto View function more eff ectively.
• This can be set when Picture Mode is set to
Intelligent Auto View.
1
From the PICTURE menu, press or to
select Lighting Type.
2
Press or to select Fluorescent Light or
Light Bulb.
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press or to
select 3D Colour Management.
2
Press or to select On.
3D Colour Management
3
Press or to select Base Colour
Adjustment.
4
Press OK, then press or to select an item
you want to adjust.
Base Colour Adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
5
Press , then press or to select Hue,
Saturation or Brightness.
On
Hue
Saturation
Brightness
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2014/08/21 14:23:46
2014/08/21 14:23:46
27