Table of Contents
Advertisement
To set a User Password:
1.
Select the Change User Password item and press <Enter>.
2.
On the password box that appears, type a password composed of at
least six letters and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message "Password Installed" appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user
password.
Clear User Password
Clear User Password
Clear User Password
Clear User Password
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
Password Check [Setup]
Password Check [Setup]
Password Check [Setup]
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the
Setup utility. When set to [Always], BIOS checks for user password both
when accessing Setup and booting the system.
Configuration options: [Setup] [Always]
Boot Sector Virus Protection [Disabled]
Boot Sector Virus Protection [Disabled]
Boot Sector Virus Protection [Disabled]
Boot Sector Virus Protection [Disabled]
Boot Sector Virus Protection [Disabled]
Allows you to enable or disable the boot sector virus protection.
Configuration options: [Disabled] [Enabled]
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
4 - 3 5
4 - 3 5
4 - 3 5
4 - 3 5
4 - 3 5
Advertisement
Table of Contents
