7.
Carefully align and place the plate
on a rectangular cut on the
contour sheet.
Make sure that the metal support plates fit perfectly to the rectangular
cuts on the contour sheet; otherwise, the CPU heatsink screws would
not align to the metal nuts.
8.
Repeat steps 4 and 7 to prepare
and install the second plate.
9.
Remove the contour sheet from
the chassis.
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
2 - 5
2 - 5
2 - 5
2 - 5
2 - 5