Table of Contents
Advertisement
2.2.3
2.2.3
2.2.3
Support plates for motherboard
Support plates for motherboard
Support plates for motherboard
2.2.3
2.2.3
Support plates for motherboard
Support plates for motherboard
For additional protection from motherboard breakage due to the weight of
the CPU heatsinks, your motherboard package comes with a solution kit
that consists of:
• 2 x metal support plates
• 1 x contour sheet
• 3 different sets of metal nuts and rubber pads for varied chassis
standoffs (each set contains 8 metal nuts and 2 rubber pads)
To install the support plates:
1.
Open and lay your system chassis
flat on a stable surface, then
place the motherboard standoffs
on the holes as shown.
2.
Align the holes of the contour sheet with the standoffs on the base of
the chassis. Press the sheet flat making sure that it is completely
affixed to the chassis.
3.
Determine the height of the standoffs on your chassis, and select the
appropriate set of metal nuts and rubber pads from your package.
Use a nut size that is slightly lower than the standoffs on your chassis.
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
A S U S N C L V - D ( A )
S t a n d o f f
S t a n d o f f
S t a n d o f f
S t a n d o f f
S t a n d o f f
2 - 3
2 - 3
2 - 3
2 - 3
2 - 3
Advertisement
Table of Contents
