Canon 1000 Service Manual page 396

5. INSTALLATION
Step
4 On the left side, put the belt directly to
the left cover. (The left cover will warp
when tension is imposed on the belt,
but it will recover as soon as the belt is
detached.)
5 On the right side, secure the harness
base removed previously by means of
duct tape, and put the belt directly on
the base plate.
6 At the right rear, put the belt over the
developing bias assembly protection
member mounted previously.
7 At the left rear, put the belt directly on
the base plate.
5-22
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks