V. INSTALLING THE CONTROL CARD V
Step
1
Open the copier's front cover (left,
right).
2
Remove the screw, and remove the
hopper assembly right cover.
3
Remove the screw, and remove the
hopper assembly left cover.
4
Remove the two fixing screws from the
hopper assembly.
5
Holding the right and left grips, pull out
the hopper assembly to the front.
6
Remove the copier's left side plate, and
remove the three screws used to fix the
control panel in place.
COPYRIGHT © 2001 CANON INC.
Work
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Left cover
Screw
Fixing screws
Hopper assembly
Grip
Screws
5. INSTALLATION
Screw
Right cover
Grip
5-39