1.4 To access components from the side, remove the relative lateral panel:
(a) First remove the worktop (see 1.1), the plinth (free-standing versions) and the foot support (see 1.2).
(b) Remove the three rear screws, the upper and the lower front.
(c) Detach the lateral panel from the rear and slide away from the frontal anchor slot.
NB: Before laying the dishwasher on a side panel or on the rear panel
suck the water in the sump, for example by using a syringe, so as the
water does not reach the pressure switch tube or the tub.
STRUCTURAL CHARACTERISTICS
2
SOI/TD
(e)
(c)
5/23
(d)
599 37 44-27