Upper Rear Cross-Member; Upper Front Cross-Member - Electrolux DIVA Series Service Manual

7.12 Upper rear cross-member

(a) Remove the worktop (see 1.1), the plinth (see 1.2) and both lateral panels (see 1.4).
(b) Remove the two upper screws which secure the cross-member to the tub.
(c) Detach the plastic clips which secure the
cross-member to the lateral sheet metal
reinforcement plates.
(d) Pull the cross-member upwards and away from
the rear uprights

7.13 Upper front cross-member

(a) Remove the worktop (see 1.1), the plinth (see 1.2) and both lateral panels (see 1.4).
(b) Remove the four screws which secure the upper cross-member
frontally.
(c) From inside the tub, remove the four upper screws (see 7.3.d).
(d) Remove the cap which covers the hole for the latch, remove
the central screw the plaque and the bridging plug.
(e) Pull the upper cross-member upwards and away from the
lateral uprights.
Important: To replace the latch ferrule and/or the plate, which are
secured to the tub, simply remove the central screw.
SOI/TD 22/23
(b)
599 37 44-27