Locking/Unlocking Your Phone; Using Speakerphone - Pantech Verse Quick Start Manual

Voicemail
Setting up Voicemail
1. Slide the phone up and press my phone number and the SEND
Key . If you hear a greeting, press the # Key
2. Follow the setup tutorial.
3. Select a password.
4. Record a voice signature and greeting.
Accessing your Voicemail from your Phone
1. Dial *86 or your 10-digit wireless phone number + SEND Key
2. Follow the prompts to enter your password or start using your
mailbox.
Shortcut: Slide the phone up, press and hold 1
to access your voicemail box.
Accessing your Voicemail from any Phone
1. Dial your wireless number.
2. During greeting, Press the * Key
when prompted.
10
to interrupt it.
.
or *86 and press SEND Key
and enter your password

Locking/Unlocking your Phone

1. Slide the phone up, press the
Settings > 4. Phone Settings > 4. Security.
2. Enter the four-digit lock code and press the
lock code is the last 4 digits of your phone number.
3. Press 4. Lock Phone Now.
4. To unlock the phone from idle mode, slide the phone up and press
the Right Soft Key [Unlock], enter the four-digit lock code and
press the Key.
Unlock code is not needed unless the user sets it.
Note:

Using Speakerphone

1. To activate, press the END/POWER Key
in less than three seconds to unlock the keypad.
2. Press the Speakerphone Key
3. To deactivate, press the Speakerphone Key
BASICS
Key [MENU] > press 9. Tools &
Key. The default
, then press the Key
.
again.
11