First Steps - Pantech Verse Quick Start Manual

First Steps

Installing your Battery
1. Insert your finger tip into the slot (1), then push down on top of the
battery cover and slide it off to remove (2).
2. Slide the battery into the slot (3) by aligning the contacts and press
down (4) until you hear the "click".
Correct
3. Align the cover tabs with the slots on the back of the device (1) and
slide the battery cover onto the unit until it snaps into place (2).
4
Incorrect
If the battery is not correctly placed in the compartment, the handset will
Note:
not turn on and/or the battery may detach during use.
Correct
Removing your Battery
1. To remove the battery cover, insert your finger tip into the slot (1),
then push down on top of the battery cover and slide it off (2).
2. Insert your fingernail into the slot and lift the battery (3), and pull
the battery (4).
BASICS
Incorrect
5