Table of Contents
Advertisement
Available languages
Available languages
Setting Up My Contacts Backup
1. After the application is launched, you will come to the Welcome
Screen. Select next to continue. You must accept the terms and
conditions to proceed to the set up screen.
2. At the set up screen, you will be prompted to enter your PIN. By
default, the PIN will be the last 4 digits of your Cellular Telephone
Number. (You can change your PIN later via the Set Up menu by
selecting Change PIN). Select OK.
3. If you have contacts saved to your device, you can back up contacts
stored on the device to My Contacts Backup server by selecting
Backup from the application main screen.
4. Within the Set Up menu, you can view your account information,
you can set automatic backups to occur, change PIN, change
language, and view the help section of the application.
My Contacts Backup: easyedge
SM
charges for MCB while roaming should dial 611 for a bill credit.
Using Camera/Video Recorder
Take Picture
1. Slide the phone up, press the
4. Multimedia > 1. Picture & Video > 3. Take Picture.
24
Pay-As-You-Go users who incur data access
Key [MENU], then press
APPS AND FEATURES
Shortcut: From idle mode, if the keypad is locked, press the
then press the
Key
in less than three seconds to unlock the keypad. Press the
Camera Key (located on the right side of the device) to access the camera
viewfinder.
2. Point the camera lens at your subject. You can check the picture
framing through the display screen.
3. Press the
Key [TAKE] to take the picture.
4. After taking the picture, it will be displayed. To save the picture,
press the Left Soft Key
[Save]. To take another picture without
saving the picture you just took, press the Right Soft Key
[Erase]. To send the picture to someone, press the
Record Video
1. Slide the phone up, press the
4. Multimedia > 1. Picture & Video > 4. Record Video.
Shortcut: From idle mode, if the keypad is locked, press the
then press the
in less than three seconds to unlock the keypad. Press
Key
and hold the Camera Key (located on the right side of the device) to access
the video camera viewfinder. To switch from the video camera to camera or vice
versa, press and hold the Camera Key (located on the right side of the device).
2. Point the camera lens at your subject. You can check the video
framing through the display screen.
END/POWER Key
Key [SEND].
Key [MENU], then press
END/POWER Key
,
,
25
Advertisement
Table of Contents
