Replacing The Potentiometer - Invacare Lynx Service Manual

6.5

Replacing the potentiometer

CAUTION! Burn and scald hazard if power cable is short-circuited!
• Interrupt the power supply by removing the batteries before you start work on the electronic
system.
CAUTION! Risk of accidents!
• The new potentiometer must be set to the middle position before inserting. Potentiometers
which are not in the middle position can result in dangerous driving situations!
Requirements:
• Phillips screwdriver
• Allen key – open-ended spanner 2 mm
• Digital multimeter
•
From the operating manual:
•
Remove the seat
•
Remove the battery pack.
•
Further work:
•
Remove screws (1) below operating
console.
•
Pull the operating console upwards out of
the front fixing (1).
21