Omron BP652 Instruction Manual page 18

SETTING THE POSITIONING SENSOR
Press and hold the
sensor. The Positioning sensor is set "on" as default.
Press the START/STOP button to store the new
setting.
2. Press the START/STOP button.
All symbols appear on the display.
Heart Zone Guidance-The monitor has a built-in Positioning sensor that is
used as an aid in determining if the monitor is at the correct height. It has been
designed to work with most people so that when your wrist is at the correct
position relative to your heart, the Positioning indicator will be blue. If the
Positioning indicator changes to orange, the device may not be at the correct
height relative to your heart. Due to difference in individual size and physique,
this feature may not helpful in all cases and you may wish to turn off this
feature. If you feel the position of the wrist according to positioning sensor's
guidance does NOT match your heart level, please turn off this feature and
follow your judgement. It can be disabled, see "Setting the Positioning Sensor"
below.
Downloaded from www.Manualslib.com
TAKING A MEASUREMENT
button to reset the Positioning
manuals search engine
18