Mio LINK Quick Start Manual page 7

ZONE LED COLOR
1 Light Blue
2 Blue
3 Green
4 Orange
5 Red
Note: This table is only a suggested range. Refer to Configuring Your
Mio LINK (pg. 8) for more details.
If a valid heart rate signal is not found within the initial 2 minutes,
the LED will light up in red for 2 seconds, then Mio LINK will
automatically leave Heart Rate Mode and turn off.
4. During your workout, if the red LED is flashing in a steady pattern
(ON for 1 second, OFF for 1 second), Mio LINK has lost connection
to your heart rate. Please refer to Troubleshooting (pg. 8).
5. To turn off Mio LINK, press and hold the Button until the LED turns
solid. Your Mio LINK is switched off when the LED turns off.
LOWER HR LIMIT UPPER HR LIMIT
0% of MHR
60% of MHR
70% of MHR
80% of MHR
90% of MHR
ENGLISH 7
< 60% of MHR
< 70% of MHR
< 80% of MHR
< 90% of MHR
220 BPM