Reverse Burst
Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of either 180/240.
Notes:
•
For information on other CPS features, refer to
the HELP file in the CPS.
•
Some of the features available with the CPS
software may vary depending on the radio model.
CLONING RADIOS
You can clone CP110™ Series radio profiles
from one Source radio to a Target radio by
using any one of these 3 methods:
•
a Multi Unit Charger (MUC - optional accessory),
•
Two Single Unit Chargers (SUC) and a Radio-to-
Radio cloning cable (optional accessory),
•
the CPS.
46
English
Cloning with a Multi Unit Charger (MUC)
To clone radios using the MUC, there must be
at least two radios:
•
a Source radio (radio which profiles will be cloned
or copied from) and
•
a Target radio (the radio which profile will be
cloned from the Source radio.)
The Source radio has to be in Pocket 1, 3 or 5
while the Target radio has to be in Pocket 2, 4
or 6, matching in the MUCs pockets by pairs as
follows: