Time-Out Timer; Reverse Burst; Busy Channel Lockout - Motorola XT220 User Manual

To delete a channel from the Scan List:
• To start scanning, press the Scan button.
• Wait until radio pauses on the channel you
wish to eliminate. Press the Nuisance Channel
Delete button to temporarily remove it from the
Scan List.
• The removed channel will not be scanned
unless Scan is restarted or the radio is reset.

Time-Out Timer

This timer sets the amount of time that the
radio can continuously transmit before the
transmission is automatically terminated. The
default setting is 60 seconds.

Reverse Burst

Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of 120, 180 or 240.
Notes:
• The features described in previous pages are just
some of the features CPS has. CPS offers more
capabilities. For more information refer to the
26
English
HELP file in the CPS.
• Some of the features available with the CPS
software may vary depending on the radio model.

Busy Channel Lockout

If Busy Channel Lockout is enabled, the radio
checks for channel activity before you can
transmit. This prevents you from interrupting
the current channel activity.