4.20 LCD Bezel
4.20 LCD Bezel
Removing the LCD Bezel
Remove the LCD bezel according to the following procedures and Figures 4.36, 4.37 and 4.38.
1. Remove the four screw rubbers on the LCD bezel.
2. Remove the four M2.5x4 screws as shown in Figure 4.36.
3. Use your fingers to pry up the LCD bezel from the inside left and right edges, using an
outward rolling motion as indicated in Figure 4.37.
Satellite M600/M640/M645/M647 Maintenance Manual
Downloaded from LpManual.com Manuals
M2.5x4*4
Figure 4.36 Removing the LCD bezel screws
4 Replacement Procedures
4-53