Jayco Eagle 264 BH Owner's Manual page 86

• Push plug until the sleeve snaps forward, locking the plug into the socket.
(Fig. 5-16)
• Turn handle to "ON" position to turn gas on. (Fig. 5-17)
Fig. 5-13
Fig. 5-15
4. Open the lid to the BBQ Grill.
5. Using an electic match, light the grill using the following procedures:
• Light the electric match.
• Insert it into the middle slot on the bottom of the BBQ Grill.
• On the grill control knob (Fig. 5-14), depress and turn the knob to the desired
temperature.
• The grill should light at this point.
6. If the grill does not light, turn the gas off, wait five minutes and repeat the above
steps.
7. Use the temperature control knob to adjust the grill to the desired temperature.
The BBQ Grill grate is coated with standard grill enamel and can be cleaned as you
would a grill at home. Underneath the grate, there is a heat defuser. This is formed and
ventilated to distribute the heat from the burner. Do not use lava rocks in this grill.
To disconnect the BBQ grill, turn the temperature control to the "OFF" position. Reverse
the above fuel hose hookup procedures. Wait until the grill is completely cooled, and
then store it in the supplied carrying case. This carrying case will ONLY accomodate a
cool grill. The grill carrying case has a pocket for accessories such as the fuel hose in the
lid. The bracket will not fit inside the carrying case and will need to be stored in a
separate location.
CAUTION: The BBQ grill must be COMPLETELY cooled before storing to avoid
damaging the carrying case.
Fig. 5-14
Fig. 5-16
75
Fig. 5-17