Operations Using The Channel Edit Section - RSS M-300 Owner's Manual

Operations using the CHANNEL EDIT section

Most operations for the AUX, MTX, and MAIN can be performed in the CHANNEL EDIT section. Here we will explain channel operations
using the CHANNEL EDIT section.
fig.ChEditSection.eps
Selecting the channel to edit
1.
Use the [SEL] buttons of the fader module section to
select the channel that you want to edit.
fig.SELBtn.eps
[SEL]
Each time you press the MAIN [SEL] button, it will select the MAIN L,
MAIN R, or MAIN C one after another.
2.
The selected channel is shown in the channel indication
at the upper center of the screen.
fig.ScrSelectedAux.eps
[SEL]
AUX, MTX, MAIN operations
Viewing the parameter values
1.
In the CHANNEL EDIT section, press [CH DISP].
The CHANNEL DISPLAY screen will appear.
fig.ScrChAux.eps
Even if you operate the knobs of the CHANNEL EDIT section
without accessing the CHANNEL DISPLAY screen, the value
of the currently-operated parameter is shown in the sub-
display area.
55