Viewing The Connected M-48 Units - RSS M-300 Owner's Manual

Management of the M-48 live personal mixer

Viewing the connected M-48 units

You can use the M-48 MANAGER popup to view a list of the M-48
units connected to the M-300's REAC B port.
Accessing the M-48 MANAGER popup
1.
In the MONITOR section, press [DISP] to access the
MONITOR screen.
fig.ScrMonitor2.eps
2.
Press [F8 (M-48 MANAGER)].
fig.ScrM48Manager_Guide.eps
1
The M-48 MANAGER popup will appear.
1 Number of M-48 units
This indicates the number of M-48 units that are connected
to the M-300's REAC B port.
2 M-48 list
This lists the M-48 units that are connected to the M-300's
REAC B port. You can move the cursor to an item in the list
and press [ENTER] to edit that item.
The items shown in the list and the function of the [ENTER]
button are as follows:
Item Explanation
NO. Indicates the order in the
list
UNIT Indicates the unit name
NAME
MEMORY Indicates the current
NO. memory number
170
2
Function of [ENTER]
Accesses the ARRANGE
UNIT popup
Accesses the NAME
EDIT popup
Accesses the M-48
MEMORY popup
Item Explanation
MEMORY If this is checked,
SAFE MEMORY SAFE is
activated; recall/store
operations from the M-
300 will be prohibited
MUTE If this is checked, the M-
48's output will be muted
The function buttons have the following operations:
[F1 (MUTE CLEAR)] Clears output muting for all M-48 units. This will
be on (light blue) if there are any M-48 units
whose output is muted (p. 171).
[F2 (SETUP)] Accesses the M-48 SETUP popup, where you
can make settings for the M-48 unit at the
cursor location (p. 172).
[F3 (COPY)] Accesses the M-48 COPY popup, where you can
copy settings from the M-48 unit at the cursor
location to another M-48 unit (p. 182).
[F4 (LIBRARY)] Accesses the M-48 LIBRARY popup, where you
can recall/store library data for the M-48 unit at
the cursor location (p. 185).
[F5 (LOAD/SAVE)] Accesses the M-48 LOAD/SAVE popup, where
settings of the M-48 at the cursor location can
be saved to USB memory or loaded from USB
memory (p. 187).
[F7 (UPDATE)] Updates the M-48's system program.
[F8 (CLOSE)] Closes the popup
* M-48 UPDATE is for future updates of the system program. For details
on performing the update, refer to the explanation provided with the
updater.
You can assign a USER button to access this popup (p. 136).
Function of [ENTER]
Check/uncheck
Check/uncheck
*