Listing The Channel Names And Group Names - RSS M-300 Owner's Manual

Listing the channel names and group names

NAME LIST tab
fig.ScrMeterList_Guide.eps
1 Name list
This lists the names of each channel and group.
fig.List_Compo_Guide.eps
1 2
Name
1
This is the name of the channel or group. If you move the
cursor to the name of a channel, that channel will become
the selected channel.
Link indication
2
This indicates the link status of the channel.
To change the link status of a channel, move the cursor to the
name of the desired channel, and press [F5 (LINK)] to turn link
on/off.
The function buttons specific to the NAME LIST tab have the
following operations:
*1
[F5 (LINK)] Turns link on/off for the channel at the cursor
location.
[F6 (NAME EDIT)] Accesses the NAME EDIT popup, where you can
edit the name at the cursor location.
*2
[F7 (COPY)] Accesses the COPY popup, with the channel at
the cursor location as the copy-source.
*1 This is unavailable if the cursor is at MAIN L, MAIN R, DCA1–4, or
MUTE1–4.
*2 This is unavailable if the cursor is at DCA1–4 or MUTE1–4.
NAME EDIT popup (p. 50).
CHANNEL COPY popup (p. 51).
AUX/MTX/MAIN COPY popup (p. 64).
1
Metering
97