Remote Settings - RSS M-300 Owner's Manual

Remote settings

The REMOTE popup of the SYSTEM screen is used to make
remote settings.
MIDI settings
The MIDI tab of the REMOTE popup is used to make MIDI settings.
1.
In the SETUP section, press [SYSTEM] to access the
SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F4 (REMOTE)].
fig.ScrSysRemote.eps
The REMOTE popup will appear.
3.
Press [F1 (MIDI)].
fig.ScrSysRemoteGuide.eps
1
3
2
4
The MIDI tab will appear.
1 MIDI/RS-232C selection indication
This shows the status of the rear panel MIDI/RS-232C select
switch.
The functionality of the selected connector(s) is active.
MIDI
RS-232C
5
MIDI is selected.
RS-232C is selected.
Always make sure to switch off the M-300's power before
you change the setting of the MIDI/RS-232C select switch.
2 Dev ID knob
This sets the M-300's device ID in a range of 1–32. This
setting is common to the MIDI tab, USB MIDI tab, and V-LINK
tab.
3 RECEIVE select buttons
Here you can select the items of MIDI data that the M-300
will receive.
FADER, MUTE Change (CC)
SCENE Change (PC)
Sys Ex
MMC
4 SEND select buttons
Here you can select the items of MIDI data that the M-300
will transmit.
FADER, MUTE Change (CC)
SCENE Change (PC)
Sys Ex
5 MIDI OUT/THRU select buttons
These select the function of the rear panel MIDI OUT/THRU
connectors.
OUT
THRU
If you select THRU, the settings of the SEND buttons will have no
effect.
4.
In the MIDI/RS-232C select indication, verify the status of
the rear panel MIDI/RS-232C select switch.
5.
Move the cursor to the Dev ID knob and specify the
device ID.
6.
Move the cursor to the RECEIVE select buttons for each
item that you want MIDI to receive, and press [ENTER] to
select the button.
7.
Move the cursor to the SEND select buttons for each item
that you want MIDI to transmit, and press [ENTER] to
select the button.
8.
Move the cursor to the desired MIDI OUT/THRU select
button, and press [ENTER] to select it.
Remote
Faders and mute changes
(control changes)
Scene changes
(program changes)
System exclusive
MMC for the USB memory recorder
Fader and mute changes
(control changes)
Scene changes
(program changes)
System exclusive
Use as a MIDI OUT connector.
Use as a MIDI THRU connector.
149