RSS M-300 Owner's Manual page 79

When the LIMITER popup is displayed, the limiter can be
adjusted using the EQUALIZER area controls for the CHANNEL
EDIT section.
Press [HI MID ] / [HI ] to select PARAM1 or PARAM2, and
use Q/FREQ/GAIN knobs to control the corresponding
parameters.
Selection Knob Parameter
PARAM 1 Q Threshold level
FREQ Attack time
GAIN Release time
PARAM 2 Q -
FREQ Knee
GAIN -
The function buttons have the following operations:
[F1 (LIMITER ON)] Turns the limiter on/off.
[F4 (LIBRARY) Accesses the LIMITER LIBRARY popup.
[F5 (PEAK CLEAR)] Clears the level meter's peak hold or over
indication.
[F8 (CLOSE)] Closes the popup.
Accessing the LIMITER popup
1.
In the fader module section, press [SEL] to select the
desired channel.
2.
In the COMP area of the CHANNEL EDIT section, press
[DISP].
fig.PopLmt.eps
The COMPRESSOR popup will appear.
Using the limiter library
You can recall limiter settings from the library, or store the
current limiter settings in the library.
The LIMITER LIBRARY popup is used to perform limiter library
operations.
1.
Access the LIMITER popup.
2.
Press [F4 (LIBRARY)] to access the LIMITER LIBRARY
popup.
ffig.ScrLmtLibGuide.eps
1 2
1 Channel indication
This indicates the channel to which the GATE/EXPANDER
LIBRARY popup applies.
2 Library data list
This is a list of the library data.
The function buttons have the following operations:
[F2 (PREVIEW)] Previews (auditions) the library data that is
selected in the list.
[F3 (NAME EDIT)] Accesses the NAME EDIT popup.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)] Stores the current settings into the selected
library data.
[F6 (CLEAR)] Clears the selected library data.
[F7 (LOCK)] Locks/unlocks the selected library data.
[F8 (CLOSE)] Closes the popup.
For details on library operations, refer to "Library operations" (p.
37).
Dynamics
79