Menu Items; Sub-Menu Items; Configuration Fields; Pop-Up Window - Asus Terminator 2 Barebone System T2-PE1 Product Manual

5.2.4 5.2.4 5.2.4

Menu items

Menu items Menu items
5.2.4 5.2.4 Menu items Menu items
The highlighted item on the menu
bar displays the specific items for
that menu. For example, selecting
M a i n shows the Main menu items. M a i n M a i n
M a i n M a i n
The other items (Advanced,
Power, Boot, and Exit) on the
menu bar have their respective
menu items.
5.2.5 5.2.5

Sub-menu items

Sub-menu items
5.2.5 5.2.5 5.2.5 Sub-menu items Sub-menu items Sub-menu items
A solid triangle before each item on any menu screen means that the item
has a sub-menu. To display the sub-menu, select the item and press
<Enter>.
5.2.6 5.2.6 5.2.6

Configuration fields

Configuration fields Configuration fields
5.2.6 5.2.6 Configuration fields Configuration fields
These fields show the values for the menu items. If an item is
user-configurable, you can change the value of the field opposite the item.
You cannot select an item that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when
selected. To change the value of a field, select it then press <Enter> to
display a list of options. Refer to "5.2.7 Pop-up window."
5.2.7 5.2.7 5.2.7 5.2.7 5.2.7

Pop-up window

Pop-up window Pop-up window Pop-up window Pop-up window
Select a menu item then press <Enter> to display a pop-up window with
the configuration options for that item.
5.2.8 5.2.8

Scroll bar

Scroll bar
5.2.8 5.2.8 5.2.8 Scroll bar Scroll bar Scroll bar
A scroll bar appears on the right
side of a menu screen when there
are items that do not fit on the
screen. Press the Up/Down arrow
keys or <Page Up> /<Page Down>
keys to display the other items on
the screen.
5.2.9 5.2.9 5.2.9

General help

General help General help
5.2.9 5.2.9 General help General help
At the top right corner of the menu
screen is a brief description of the
selected item.
A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1
BIOS SETUP UTILITY
Main Advanced Power Boot
Main Configuration
System Time [16:37:21]
System Date [Thu,01/05/2005]
Legacy Diskette A [1.44M, 3.5 in]
System Time [11:10:19]
System Date [Fri 07/15/2005]
Primary IDE Master : [ST320410A]
Legacy Diskette A [1.44M, 3.5 in.]
Primary IDE Slave : [ASUS CD-S520/A]
Onboard PCI S-ATA controller [Disabled]
Primary IDE Master [Not Detected]
Primary IDE Slave [Not Detected]
Serial ATA Port1 [Not Detected]
Serial ATA Port2 [Not Detected]
Serial ATA Port3 [Not Detected]
Serial ATA Port4 [Not Detected]
System Information
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
M a i n m e n u i t e m s M a i n m e n u i t e m s M a i n m e n u i t e m s M a i n m e n u i t e m s M a i n m e n u i t e m s
Advanced PCI/PnP Settings
WARNING: Setting wrong values in
below sections may cause system to
malfunction.
Plug And Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
PCI IDE BusMaster [Enabled]
P o p - u p w i n d o w P o p - u p w i n d o w P o p - u p w i n d o w
P o p - u p w i n d o w P o p - u p w i n d o w
Exit
Use [ENTER], [TAB],
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system
time.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
S c r o l l b a r S c r o l l b a r
S c r o l l b a r S c r o l l b a r S c r o l l b a r
5 - 1 3 5 - 1 3 5 - 1 3 5 - 1 3 5 - 1 3