Bypass Valve - Hellenbrand E3 Owner's Manual

ITEM NO.
ORDER NO.
1 102141
2-4 102051*
3 102687
4 102165
5 102321
*Order number 102051 includes 102687 and 102165, which are item
numbers 3 & 4.
**Only used if metering is not to be done (time clock units)
The nuts and caps are designed to be unscrewed or tightened by hand or
with the special plastic wrench. If necessary a pliers can be used to un-
screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or
caps. Do not place screwdriver in slots on caps and/or tap with a hammer.
ITEM NO.
ORDER NO.
1 101325
.
NOTE: Individual Bypass Components Are Not Available, Must Order
Complete Bypass Assembly.
ITEM NO.
ORDER NO.
Not Shown 101172
1 102141
2 102437
3 102165
11* 101172
*11 (Not Shown)
The nuts and caps are designed to be unscrewed or tightened by hand or
with the special plastic wrench. If necessary a pliers can be used to un-
screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or
caps. Do not place screwdriver in slots on caps and/or tap with a hammer.
Do not use pipe dope or other sealants on threads. Teflon tape must be
used on threads of the 1" NPT connection and on the threads for the drain
line connection. Teflon tape is not necessary on the nut connection nor
caps because of o-rings seals.
15
WATER METER AND METER PLUG
DESCRIPTION
Nut 1" QC
Meter Assy.
Turbine Assy.
O-ring 215
Meter Plug Assy.**
DESCRIPTION
Complete Bypass Assembly
DESCRIPTION
Bypass 90º Vert. Assy.
Nut 1" Quick Connect
Split Ring
O-Ring 215
Bypass Vertical Adpt. Assy.
QTY.
1
1
1
1
1

BYPASS VALVE

QTY.
QTY.
2
2
2
2
Figure 19
Figure 20