Trane 7CONT624AS42DA User's Manual And Installation Instructions page 6

Scheduling
Edit Schedule (Local)
Press the following button sequence to edit or create an entirely new daily schedule.
Button Press
Press Menu from Home
screen
Press Next
Press Select
Press Select
Press Select
Press Next
Press Next
Press Next
After Pressing Done
Press Yes to Copy
Press Done**
Press Done**
The schedule may be changed locally at the control with the Edit Schedule menu. You can also make temporary changes at
https://emonitor.us or with the eMonitor mobile apps.
*Note: You must assign Wake to the earliest time period of the day. If you normally close after midnight--for example 1am--then the period beginning at 1 am
must be treated as the Wake period. This limitation is not there if you set the program at https://emonitor.us.
**Note: For a new schedule to be accepted, you must press Done at least twice. If you hit Back, the schedule will not be saved and will default back
to what it was before.
6
Menu Displayed
USER SETTINGS
SCHEDULE
EDIT SCHEDULE
SELECT DAY
SET TIME
HEAT SETPOINT
COOL SETPOINT
Copy Schedule is dis-
played at the top of the
screen. Yes
and No buttons are dis-
played on the right side of
the screen.
COPY "_ _ _" To is
displayed at the top of the
screen. Yes and
No buttons are displayed
on the right side of the
screen.
EDIT SCHEDULE
menu is displayed
Home Screen is displayed
User Guide
Edit Schedule
What Needs to Be Done?
Continue to press "Next" until the day of week to edit is displayed.
Set the start time for each of four periods for the day displayed. Use the Up/Down
buttons to set the start time for the period displayed. Wake is the default period.
Pressing the "Next" button three times cycles through the period displayed (Wake,
Day, Evening and Night).*
Use the Up/Down arrows to set the Heat set point for the period displayed
Use the Up/Down arrows to set the Heat set point for the period displayed
Continue pressing Next and using up/down arrows until all Heat & Cool set points
are set for the day displayed. After editing a start time or editing the set point
temperature for one or more periods press "Done" to save edits. If "Done" is not
pressed edits will not be saved.
Press yes to copy or no to return to Edit Schedule menu.
Pressing Yes will copy the day displayed to the next day in the week. If Yes is
pressed five more times the scheduled will be copied to the remaining 5 days in
the week. To skip over a day and avoid copying the schedule to that day press No.
To return to the Home Screen press "Done" one more time.