Procedure To Program Spare Securilock Keys To Your Vehicle - Mercury Sable 1999 Owner's Manual

Controls and features
not available (one or both of your original keys were
lost or stolen), you must bring your vehicle to your
dealership to have the spare SecuriLock
programmed.
Procedure to program spare SecuriLock
to your vehicle
New SecuriLock
mechanical key cut for your vehicle.
Conventional (non-SecuriLock ) keys cannot be
programmed to your vehicle.
You will need to have two previously programmed
SecuriLock keys and the new unprogrammed
SecuriLock key readily accessible for the
procedure. Please read and understand the entire
procedure before you begin.
1. Insert the first previously programmed
SecuriLock key into the ignition and turn the
ignition from OFF to RUN (maintain ignition in RUN
for at least one second).
2. Turn ignition to OFF and remove the first
SecuriLock key from the ignition.
3. Within five seconds of turning the ignition to OFF,
insert the second previously programmed
SecuriLock key into the ignition and turn the
ignition from OFF to RUN (maintain ignition in RUN
for at least one second but no more than 5 seconds).
4. Turn the ignition to OFF and remove the second
SecuriLock key from the ignition.
5. Within 10 seconds of turning the ignition to OFF,
insert the unprogrammed SecuriLock
key/valet key) into the ignition and turn the ignition
from OFF to RUN (maintain ignition in RUN for at
least one second). This step will program your new
SecuriLock key.
6. To program additional SecuriLock
this procedure from step 1.
68
keys must have the correct
key(s)
keys
key (new
key(s), repeat