Cargo Cover (If Equipped); To Install The Shade; Rewinding The Shade - Mercury Sable 1999 Owner's Manual

Cargo cover (if equipped)

Your vehicle may be equipped with a cargo area
shade that covers the luggage compartment of your
vehicle.

To install the shade:

1. Fasten the cover
into the mounting
brackets (make sure
the cover is right side
up).
2. Pull the end of the
shade toward you and
hook the sides into the notches in the rear trim
panels.
To prevent the possibility of injuries, the
fasteners for the cargo area cover must be
properly attached to the mounting clips on the
rear trim panels.
Do not place any objects on the cargo area
cover. They may obstruct your vision or
strike occupants of the vehicle in the case of a
sudden stop or collision.

Rewinding the shade

With extended use, the cargo shade may lose its
spring tension. If this occurs, the shade must be
manually rewound. This is a two-person operation.
1. Remove the shade from the vehicle and extend it
with the smooth grain facing you.
Controls and features
55