ENGINE MECHANICAL
-
Engine Tune-up
EM-19
(b) Submerge the filter element in the water and agitate
3
it up and down more than ten times.
(c) Repeat rinsing in clean water until rinse water is clear.
(d) Remove excess water by shaking the filter element or
blowing with compressed air.
NOTICE:
Do not beat or drop filter element.
(e) Wipe off dust on the air cleaner case interior.
INSPECTION OF ALTERNATOR DRIVE BELTS
(See step 3 on page CH-3)
Drive belt deflection:
New belt
7
-
10 mm (0.28
-
0.39 in.)
Used belt 10
-
15 mm (0.39
-
0.59 in.)
Drive belt tension (Reference) :
New belt
4 0
-
6 0 kg
Used belt 20
-
35 kg
INSPECTION OF GLOW PLUGS
(See page ST-6)