Install Cylinder Head Cover; Install Exhaust Manifold - Toyota 2L-T Repair Manual

ENGINE MECHANICAL
-
Cylinder Head (2L-T)
EM-43
-
:Seal Packing
?
-
INSTALL CYLINDER HEAD COVER
+
(a) Apply seal packing to the cylinder heads as shown in
the illustration.
Part No. 08826-00080 or equivalent
Seal packing:
(b) l nstall the gasket to the cylinder head cover.
(c) Install the cylinder head cover with the eight bolts
and two nuts.
Torque: 50 kg-cm (43 in.-lb, 4.9 N-m)
INSTALL RH ENGINE HANGER
Torque: 380 kg-cm (27 ft-lb, 37 N-m)
INSTALL EXHAUST MANIFOLD
(a)
Install a new gasket in direction as shown in the illust-
ration.
(b) Install the exhaust manifold with the four nuts and
four bolts.
Torque: 530 kg-cm (38 ft-lb, 52 N-m)
(c)
Install the two heat insulators with the four bolts and
nut.
Torque: 120 kg-cm (9 ft-lb, 12 Nmm)