Resetting To Factory Settings; Menu - Mercedes-Benz 2010 SLK-Class Operator's Manual

171_AKB; 3; 60, en-US
d2ureepe,
Control system
102
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner's and/or driver's
responsibility to maintain the vehicle's
operating safety. Have all required
maintenance and safety checks performed on
the vehicle. Bring the vehicle to an authorized
Mercedes-Benz Center to address the
malfunction and warning messages.
X
Press button V or U repeatedly until
the Vehicle status message memory
menu appears in the multifunction display.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display.
Number of recorded status messages
:
X
Press button & or *.
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see "Vehicle status messages in the
multifunction display" (
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunction
display when the SmartKey in the starter
switch is turned to position 0 or removed
from the starter switch.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you switch off the ignition.
Settings menu
Introduction
In the Settings menu there are two
functions: The function To reset, push
reset button for 3 seconds, with which
you can reset all the settings to the original
factory settings and a collection of submenus
with which you can make individual settings
for your vehicle.
The following settings and submenus are
available in the Settings menu:
R
R
R
R
R
R
R

Resetting to factory settings

You can reset the settings of all submenus to
the factory settings.
For safety reasons, the function Headlamp
Mode in the Lighting submenu cannot be
Y page 236).
reset while driving.
X
2009-05-11T16:00:23+02:00 - Seite 102
Version: 2.11.8.1
Resetting to factory settings
( Y page 102)
Submenus in the Settings menu
( Y page 103)
Instrument cluster submenu
( Y page 103)
Time/Date submenu ( Y page 105)
Lighting submenu ( Y page 105)
Vehicle submenu ( Y page 108)
Convenience submenu ( Y
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
page 108)