Resetting To Factory Settings; Menu - Mercedes-Benz 2010 GL-Class Operator's Manual

Control system
132
X
Press button & or *.
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see "Vehicle status messages in the
multifunction display" (
i
After you have scrolled through all
recorded status messages, the first
recorded message appears again.
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunction
display when the SmartKey in the starter
switch is turned to position 0 or removed
from the starter switch. With KEYLESS-GO,
the number of messages will reappear when
you turn off the engine by pressing the
KEYLESS-GO start/stop button and open the
driver's door.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you switch off the ignition.
Settings menu
Introduction
In the Settings menu there are two
functions: The function To reset, press
reset button for 3 seconds, with which
you can reset all the settings to the original
factory settings and a collection of submenus
with which you can make individual settings
for your vehicle.
The following settings and submenus are
available in the Settings menu:

Resetting to factory settings

R
( Y page 132)
Submenus in the Settings menu
R
( Y page 133)
Instrument cluster submenu
R
( Y page 133)
Time/Date submenu (
R
Lighting submenu (
R
Y page 287).
Y page 135)
Y page 136)
Y
Vehicle submenu (
R
Comfort submenu (
R
Resetting to factory settings
You can reset the settings of all submenus to
the factory settings.
For safety reasons, the function Lamp
Circuit Headlamp in the Lighting
submenu cannot be reset while driving.
The following message appears in the
multifunction display:
Settings
Cannot be
completely reset
to factory settings
when engine is running.
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press the reset button in the instrument
cluster ( Y page 124) for approximately
3 seconds.
The request to press the reset button once
more to confirm appears in the
multifunction display.
X
Press the reset button once more.
The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
page 138)
Y page 139)