Table of Contents
Advertisement
251_AKB; 4; 52, en-US
d2ureepe,
Resetting to factory settings
You can reset the settings of all submenus to
the factory settings.
For safety reasons, the function Lamp
Circuit Headlamp in the Lighting
submenu cannot be reset while driving.
The following message appears in the
multifunction display:
Settings
Cannot be
completely reset
to factory settings
when engine is running.
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press the reset button in the instrument
cluster (
Y
page 122) for approximately
3 seconds.
X
Press the reset button once more.
The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
approximately 5 seconds, the Settings
menu reappears in the multifunction display.
2009-03-23T09:22:52+01:00 - Seite 131
Version: 2.11.8.1
Control system
Submenus in the Settings menu
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
The collection of the submenus appears in
the multifunction display. There are more
submenus than can be displayed
simultaneously.
X
Press button X.
The selection marker moves to the next
submenu.
X
Scroll down with button X, scroll up
with button W.
X
With the selection marker on the desired
submenu, use button & to access the
individual functions within that submenu.
X
Once within the submenu, use button
& to move to the next function or button
* to move to the previous function
within that submenu.
X
Use button W or X to change the
settings of the respective function.
The following lists show what settings can be
changed within the various menus. Detailed
instructions on making individual settings can
be found on the following pages.
Instrument cluster submenu
Selecting speedometer/odometer display
R
mode (
Y
page 132) (Canada only)
Selecting digital speedometer display
R
mode (
Y
page 132)
131
Z
Advertisement
Chapters
Table of Contents
