Mercedes-Benz 2010 SLK-Class Operator's Manual page 206

171_AKB; 3; 60, en-US
d2ureepe,
Tires and wheels
204
Restart the TPMS after adjusting the tire
inflation pressure to the inflation pressure
recommended for the vehicle operating
condition. Tire inflation pressure should only
be adjusted on cold tires. Observe the
recommended tire inflation pressure on the
Tire and Loading Information placard on the
driver's door B-pillar. Some vehicles may have
supplemental tire inflation pressure
information for driving at high speeds or for
vehicle loads less than the maximum loaded
vehicle condition. If such information is
provided, it can be found on the inside of the
fuel filler flap.
X
Using the Tire and Loading Information
placard on the driver's door B-pillar
( Y page 205) or the supplemental tire
inflation pressure information on the inside
of the fuel filler flap, make sure the tire
inflation pressure of all four tires is correct.
X
Switch on the ignition.
X
Press button V or U on the
multifunction steering wheel repeatedly
until the standard display appears in the
multifunction display (
X
Press button & or * repeatedly until
you see the current inflation pressures for
each tire appear in the display or the
following message appears in the
multifunction display:
Tire pressure is
only displayed
after driving for
a few minutes.
X
Press the reset button (
The following message will appear in the
multifunction display:
Restart tire
pressure monitor?
X
If you wish to confirm: Press button
W.
The following message will appear in the
multifunction display:
Tire Pressure Monitor
Restarted
X
i
Maximum tire inflation pressure
G
Never exceed the maximum tire inflation
pressure. Follow recommended tire inflation
pressures.
Do not underinflate tires. Underinflated tires
wear excessively and/or unevenly, adversely
affect handling and fuel economy, and are
Y page 96).
more likely to fail from being overheated.
Do not overinflate tires. Overinflated tires can
adversely affect handling and ride comfort,
wear unevenly, increase stopping distance,
and result in sudden deflation (blowout)
because they are more likely to become
punctured or damaged by road debris,
potholes etc.
Y page 92).
i
2009-05-11T16:00:23+02:00 - Seite 204
Version: 2.11.8.1
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system's specified
range. Afterwards the current tire inflation
pressures are accepted as reference values
and then monitored.
If you wish to cancel: Press button X.
When the wheel positions have been
changed, the inflation pressure of a tire
may be displayed for the wrong position
temporarily. After driving for a few minutes,
the inflation pressure will be shown for the
correct position.
Warning!
For illustration purposes only. Actual data
on tires are specific to each vehicle and