Tele Aid; System Self-Test - Mercedes-Benz 2010 SLK-Class Operator's Manual

171_AKB; 3; 60, en-US
d2ureepe,
Useful features
178
Power outlet in passenger footwell

Tele Aid

! In order to activate the Tele Aid system, a
subscriber agreement must be completed.
To ensure your system is activated and
operational, please press Information
button E to perform the acquaintance
call. Failure to complete either of these
steps may result in a system that is not
activated.
If you have any questions regarding
activation, please call the Customer
Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
(USA only) or 1-888-923-8367 (Canada
only).
Shortly after the completion of your Tele Aid
acquaintance call, you will receive a user ID
and password in the mail. You may use this
password to access the Tele Aid section in
"Owner's Online" at www.mbusa.com (USA
only). The "My Tele Aid" section will give you
access to account information, remote door
unlock and more.
The Tele Aid system is available if
it has been activated and is operational.
R
Activation requires a subscription for
monitoring services, connection and
cellular air time
vehicle battery power is available
R
the relevant cellular phone network and
R
GPS signals are available and pass the
2009-05-11T16:00:23+02:00 - Seite 178
Version: 2.11.8.1
information on to the Customer Assistance
Center
i Location of the vehicle on a map is only
possible if the vehicle is able to receive
signals from the GPS satellite network and
pass the information on to the Customer
Assistance Center.
The Tele Aid system
(Telematic Alarm Identification on Demand)
The Tele Aid system consists of three types
of response:
Automatic and manual emergency
R
Roadside Assistance
R
Information
R
To adjust the speaker volume during a Tele
Aid call do the following:
X
Press button W or X on the
multifunction steering wheel.
or
X
Use the adjustment button on your audio
system or COMAND system.
Be sure to check "Owner's Online" at
www.mbusa.com (USA only) for more
information and a description of all available
features.

System self-test

The system performs a self-test after you
have switched on the ignition.
G
Warning!
A malfunction in the system has been
detected if any or all of the following
conditions occur:
The indicator lamp in the SOS button does
R
not come on during the system self-test.
The indicator lamp in Roadside Assistance
R
button º does not come on during the
system self-test.