Abroad; Decoupling - Mercedes-Benz 2010 R-Class Operator's Manual

2010 r-class
Table of Contents

Advertisement

251_AKB; 4; 52, en-US
d2ureepe,
Do not attempt to straighten out the tow
vehicle and trailer by increasing the speed.
If the transmission shifts between gears on
R
inclines repeatedly, shift to a lower gear
range manually (
2 or 1.
A lower gear and reduction of speed
reduces the chance of engine overloading
and/or overheating.
When going down an incline, shift into a
R
lower gear and use the engine's braking
effect.
Avoid riding the brakes, thus overheating
the vehicle and trailer brakes (if so
equipped).
If the engine coolant rises to an extremely
R
high temperature when the air conditioning
is on, turn off the air conditioning system.
Engine coolant heat can be additionally
vented by opening the windows, switching
the climate control fan speed to high and
setting the temperature control to the
maximum.
During a passing maneuver extreme care
R
must be exercised since your vehicle with
a trailer will require additional passing
distance ahead than when driving without
a trailer.
Because your vehicle and trailer is longer
than your vehicle alone, you will also need
to go much farther ahead of the passed
vehicle before you can return to your lane.
Decoupling a trailer
G
Warning!
Vehicles with AIRMATIC: While you are
coupling or decoupling a trailer, make sure
nobody locks or unlocks the vehicle and/or
opens or closes doors or the tailgate.
The vehicle's level could change and you
could endanger yourself and/or others as a
result.
Y
page 119). Select 4, 3,
2009-03-23T09:22:52+01:00 - Seite 259
Version: 2.11.8.1
Driving instructions
Make sure that you do not operate the ADS
switch or the vehicle level control system
when coupling/decoupling the trailer.
X
Make sure the automatic transmission is in
park position P (
Y
page 116).
X
Engage the parking brake for the vehicle
(
Y
page 114).
X
Start the engine (
Y
page 110).
X
Close all doors and the tailgate.
X
Engage the parking brake for the trailer.
G
Warning!
Vehicles with AIRMATIC: As soon as you
disconnect the electrical connection between
the trailer and the vehicle, the vehicle will
lower. To help avoid personal injury, make
sure no one is near the wheel housing or
underneath the vehicle before the electrical
connection is disconnected.
When you decouple the trailer, the vehicle is
temporarily raised because the springs are
relieved of load. Be especially careful during
this process, as you could otherwise injure
yourself and/or others. Make sure that any
persons remaining in the vehicle do not press
the switches for vehicle level control or the
ADS.
X
Disconnect all electrical plug connectors.
X
Decouple the trailer.
X
Make sure that the trailer coupling is free
of load.
X
Turn off the engine (
Y
Driving abroad
If you plan to drive the vehicle outside the U.S.
or Canada, you should request dealer
network information for your destination from
any authorized Mercedes-Benz Center.
259
page 114).
Z

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 r350 4matic2010 r350 bluetecR-class 2010R350 4matic 2010R350 bluetec 2010

Table of Contents