Phone Book - Mercedes-Benz 2010 GL-Class Operator's Manual

2010 gl-class
Table of Contents

Advertisement

your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
telephone while driving, please use the hands-
free device and only use the telephone when
weather, road and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
You can connect your telephone to the
COMAND system via Bluetooth
separate COMAND system operating
instructions.
X
Switch on the COMAND system.
Refer to separate COMAND system
operating instructions.
X
Press button U or V repeatedly until
the message TEL appears in the
multifunction display.
One of the following messages will appear
in the multifunction display:
No Service: No network is available.
R
Bluetooth Ready: The telephone has
R
not been connected to the COMAND
system via Bluetooth
X
Connect the telephone to the
COMAND system via Bluetooth
Ready or name of the network provider
R
(if available): The telephone has found a
network and is ready for use. You can
operate it using the control system.
Answering a call
When your telephone is ready to receive calls,
you can answer a call at any time. In the
multifunction display you will then see the
following message, or if available, the caller
ID (number or name):
®
, see
®
yet.
®
.
X
Press button 6.
You have answered the call.
Ending a call or rejecting an incoming
call
X
Press button ~.
Dialing a number from the phone book
When your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
X
Press button U or V repeatedly until
the message TEL appears in the
multifunction display.
X
Press button & or * repeatedly until
the desired name appears in the
multifunction display.
If you press and hold button & or
* for longer than 1 second, the system
scrolls rapidly through the list of names
until you release the button again.
The stored names are displayed in
alphabetical order.
Selected name from the phone book
:
X
Press button 6.
The control system dials the selected
phone number.
Control system
Z
143

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 gl350 bluetec2010 gl5502010 gl4502010 gl 350 bluetecGl 2010Gl550 2010 ... Show all

Table of Contents